Redexim Verti-Drain 7215

ADE Golf and Turf Equipment from Melbourne, Victoria, Australia. Proudly supply the Redexim Verti-Drain 7215.

Building on the tradition of innovative excellence, the Verti-Drain 7215 incorporates the technology of the second-generation line with new and improved features. The 7215 boasts a working width of 61″ (1.56m) and can aerate up to 10″ (250mm) maximum, making for greater productivity when fit to a 25 hp tractor.

The 7215 offers reinforced front and rear rollers, as well as a lighter frame than the 73 series, thus having lower horsepower requirements.

  • Maintenance free, self-lubricated sealed bearings on all pivot points
  • Fully sealed greasable bearings on crankshaft, PTO and rollers
  • Lifetime grease in gearbox
Feature Benefit
Unique adjustable parallelogram forced heave Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearbox Matches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushings Long maintenance free life
Higher working speed Greater working capacity
Useable playing surface Aerate at any time without interruption of play
Model Verti-Drain 7215
Working Width 61” (1.56 m)
Working depth Up to 10” (250 mm)
Tractor [email protected] rev’s at PTO
Spacing 21⁄2” (65 mm)
Spacing 4” (100mm)
Spacing 61⁄2” (165mm)

Up to 0.60 mph (1.00 km/h)
Up to 1.00 mph (1.50 km/h)
Up to 1.60 mph (2.50 km/h)
PTO speed: (max) Up to 500 rpm
Weight 1,210 lbs (550 Kg)
Hole spacing side-to-side 4” (100 mm) @ 3⁄4” (18 mm) holes
2.5” (65 mm) @ 1⁄2” (12 mm) holes
Hole spacing in driving direction 1” - 61⁄2” (25 – 165 mm)
Recommended tractor size 25 HP with lift capacity of minimum 1,540 lbs (700 Kg )
Capacity (maximum)
Spacing 21⁄2” (65 mm)
Spacing 4” (100mm)
Spacing 61⁄2” (165mm)

Up to 16,813 sq ft (1,563 sq m)/ hour
Up to 25,866 sq ft (2,404 sq m)/ hour
Up to 42,678 sq ft (3,966 sq m)/ hour
Shipping dimensions 69” x 32” x 44” (1.7m x 0.8m x 1.1m)
Maximum tine size Solid  3/4” x 10” (18 x 250 mm)
Hollow 1” x 10” (25 x 250 mm)
Three point linkage 3- point  CAT 1
Standard items Set solid tines to 1/2” x 10” (12mm x 250mm )
Front and rear roller
3- shuttle gearbox