Redexim Verti-Drain 7626

ADE Golf and Turf Equipment from Melbourne, Victoria, Australia. Proudly supply the Redexim Verti-Drain 7626.

The 7626 is the heaviest and toughest Verti-Drain on the market. It is the ideal machine for the toughest of soil conditions, where a high productivity is needed. It weighs considerably more than the 75-series, and it has a heavier gearbox, PTO and rear roller support. Its adjustments have been made simpler. The tine-depth adjustments are made comfortably from the tractor seat via the hydraulic controls, while the original amount of ‘heave’ on the tine is left intact.

The optional wheel support is constructed extra robustly, while it falls within the 104 inch (2.6 meter) working width of the Verti-Drain. The forward speed is faster than that of the 75-series.

Feature Benefit
Hydraulic Depth Adjustment No need to leave the tractor seat
104” (2.6 m) Working Width High productivity
Weighs 4,254 lbs (1,930 kg) Able to penetrate even in the roughest conditions
Heavier Gear Box, Rear Roller and PTO Able to withstand the most punishing conditions
Optional Bogey Wheel Kit Transfers the weight of the machine off of the tractor
Model Verti-Drain 7626
Working Width 104” (2.6 m)
Working Depth up to 16” (400 mm)
Tractor Speed @500 Rev’s at PTO
Spacing 2.5” (65 mm)
Spacing 5“ (130 mm)
Spacing 7.5” (195 mm)

Spacing @ 0.45 mph (0.72 kph)
Spacing @ 0.90 mph (1.4 kph)
Spacing @ 1.35 mph (2.17 kph)
PTO speed (Max) Up to 500 rpm
Weight 4,254 lbs (1,930 kg)
Hole Spacing Side-to-Side 2.5” (663 mm) with 0.5” (12 mm) tines
5” (127 mm) with 1” (24 mm) tines
Recommended Tractor Size 7626: 65 hp, with lift capacity of 5,070 lbs (2,299 kg)
7626H: 55 hp, double acting hydraulic connection is required
Capacity (maximum)
Spacing 2.5” (65 mm)
Spacing 5“ (130 mm)
Spacing 7.5” (195 mm)

20,989 sq. ft./h (1,950 sq. m./h)
41,979 sq. ft./h (3,900 sq. m./h)
62,969 sq. ft./h (5,850 sq. m./h)
Standard Tines 1” x 16” (24 mm x 400 mm) solid
Three Point Linkage Cat 2
Accessories Available – Hydraulic Wheel Kit
– 0.5” (12 mm) & 1” (24 mm) turf hold down kits